Edged board made from common pine (Pinus sylvestris L.) is a construction lumber obtained by sawing a log with treatment of all four edges. There is no wane, and the surface is smooth. The straight-grained structure of pine provides a bending strength of 70-80 MPa at a moderate density of 500-520 kg/m³. The natural resin content increases resistance to decay. Sorting is performed according to GOST 8486-86, consisting of five grades (select, 1, 2, 3, 4), distinguished by the number of knots, cracks, and warp. Surface roughness is normalized according to GOST 7016: up to 1250 microns for grades 1–3, up to 1600 microns for grade four. Nominal cross-sectional dimensions are regulated by GOST 24454-80. Typical dimensions: thickness 25, 30, 40, 50 mm; width 100, 120, 150, 200 mm; length 3000–6000 mm. Kiln drying (KD) to a moisture content of 8–12% and natural moisture content up to 22% are available. Antiseptic treatment according to GOST 10950 extends service life in contact with soil and atmosphere. Applications: frame construction, roofing system and sheathing, load-bearing structures, carpentry blanks, interior sheathing. The wood is harvested in the Arkhangelsk, Vologda, Kirov, and Irkutsk regions, where northern pine forms a dense, fine-layered structure with enhanced strength characteristics. Packaging: bundles on spacers, tied with steel/PET tape, shrink wrap film. Shipment: rail platforms, 20/40-foot containers, road transport. Minimum order quantity of 40 m³. Export documentation: phytosanitary certificate, certificate of origin, specification. Compared to spruce, pine has a more pronounced texture and higher resin content, providing natural protection against moisture and biological damage.